Home Business model Securities Fashion magazine Living community Auto parts More

Detailed installation steps of folding shower door

2020-10-29

Advantages of folding shower door.


It has the functions of partition, screen, temperature insulation, dust prevention, noise reduction, sound insulation, and shielding. Let's take a look at the installation steps of the folding shower door.Let's explain it in detail!

One. Find a suitable location and place the track

According to the position where you want to install the folding shower door, mark on the door frame, measure whether the track length is appropriate, and cut off the excess with a saw. The bundled fold
Fold the door into the track, try to be as close to the middle as possible to prevent slipping during installation. After determining the opening direction of the folding shower door, use screws to fix the track on the wall or door frame
Above, the order is the middle first and then both sides. If it is driven into the cement wall, the expansion screw holes must be drilled in advance. After installing the track, you can unlock the folding shower door.

TWO. install the fixed card position

Lay a fixed card position on the door frame in the direction in which the folding shower door is stowed. The straight line where the fixed card position is located is 90 degrees to the upper track. Put the folding shower door away and carefully
The rear frame of the folding shower door is buckled into the fixed card position from top to bottom to complete the installation.


4.jpg


Three. install the iron absorption plate

Pull open the door of the folding shower room, and check the position of the iron-absorbing stone on the door to determine the position of the iron-absorbing plate on the wall or door frame. After determining the position of the iron-absorbing plate, drill a hole with a percussion drill to a depth of about four centimeters, and then insert the rubber sleeve. Hold the iron absorption plate, align the hole on it with the center of the rubber sleeve hole, use a screwdriver to screw the screw into the rubber sleeve to fix the iron absorption plate, and install the remaining iron absorption plate in the same way.

Fourth. install the door handle

Pull up the cover of the handle, fix both sides of the handle with screws, close the handle cover, and the installation is complete. The folding shower door is simple and convenient to save space, and installation is not difficult. There may be different installation differences between different door and window brands of the folding shower door, but it is basically the above steps. Next time you need to install the folding shower door, you can "do it yourself and get enough food".

 


Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©copyright 2009-2020 Nezavissimaia Gazeta    Contact Us SiteMap